SDSHobby
CESSNA 310 EPO/ FOAM ELECTRIC AIRPLANE RTF WITH RETRACTABLE LANDING GEAR, 2.4G LEFT HAND THROTTLE
| Wing Span | 1280mm |
| Fuselage Length | 1100mm |
| Wing Loading | 58g/ sq.dm. |
| Flying Weight | 1200g |
| RC System | 2.4G 5 CH |
| Servo | 4-6pcs Micro-Servo |
| ESC | Brushless 30A*2pcs |
| Fuselage Material | EPO |
Specifications:, Battery:, 3S 11.1V 2200mAh 25C Li-Po, Package Contents:,
Cessna 310 EPO Electric Airplane RTF Servo 4-6pcs Micro-Servo 3S ...SDSHobby
EXTREME BRUSHLESS MOTOR CHECKER
Specifications:, Input Voltage:, 7.4V-8.6V (Suggested using a 7.4V 2S1P Li-Po Battery), LCD Display Screen:, blue backlight background, white text, 16 characters*2 lines, Dimension:, 136.5*80.6*47mm, Net Weight:, 90g, Supported Motor:, sensor or sensor-less brushless motor, Standard 540 Size RC Car Motor:, .5 Turn or Over, 2 Poles in-runner Motor, Flight Motor:, Support Sensor-Less Brushless Motor, 6 Poles out-runner Motor Current Drawn Less Than 18A at 8.4V Without Loading, Features:,
n n Brushless Motor Checking n KV Measurement n RPM ...SDSHobby
DSR-30T 1800 DEGREE ROTARY AND RETRACT LANDING GEAR FOR LESS THAN 1.8KG AIRPLANE
| Low Voltage Warning | green lights switches to red light flash when voltage lower than 5.5V. |
Specification:, Retracting Range:, 90 degree for rotation, then 90 degree for retracting,
The independent control circuits charge for driving each DSR, checking ...SDSHobby
DSR-30T 90 DEGREE TRICYCLE ELECTRIC RETRACT LANDING GEAR FOR LESS THAN 1.8KG AIRPLANE
| Low Voltage Warning | green lights switches to red light flash when voltage lower than 5.5V. |
Specification:,
The independent control circuits charge for driving each DSR, checking ...SDSHobby
BLUE 1 METER SUPER BRIGHT WATERPROOF LED NIGHT STRIP LIGHT/ LED STRAP LIGHT/ LED LIGHT BAR 12V WITH 3M ADHESIVE PATCH
Features:, Working Voltage:, DC 12V, Power:, 12W per meter, Brightness:, 900LM per meter, Maximum Current:, , Note:, The light strip also has five colors, the color and its related ITEM NO. are as follows:, Red:, WPSLB-R, Yellow:, WPSLB-Y, Blue:, WPSLB-B, Green:, WPSLB-G, White:, WPSLB-W,
The dimension of the light is 5mm*5mm 5A per meter ...SDSHobby
BLUE 1 METER SUPER BRIGHT NON-WATER-TIGHT LED NIGHT STRIP LIGHT/ LED STRAP LIGHT/ LED LIGHT BAR 12V WITH 3M ADHESIVE PATCH
Features:, Size:, 5mm*5mm, Working Voltage:, DC 12V, Power:, 12W per meter, Brightness:, 900ml, Maximum Current:, 5A per meter, Note:, The light strip also has other colors, the color and its related ITEM NO. are as follows:, Yellow:, SLB-Y, Red:, SLB-R, Blue:, SLB-B, Green:, SLB-G, White:, SLB-W,
per meter Every 5cm place with crop marks, the shortest ...SDSHobby
DYNAM BRUSHLESS ESC-50A FOR MODEL AIRPLANES
| Cont. Current | 50A |
| Burst Current (>10s) | 80A |
| BEC Model | switch |
| BEC Output | 5V/3A |
| Cells of Li-Po/Li-ion | 2S-6S |
| Cells of Ni-Cd/Ni-MH | 5S-18S |
| User Programmable | yes |
| Weight | 60g |
| L*W*H (Size) | 70*31*14mm |
| Balance Discharger Protection | N/A |
Specifications:, Features:, Programmable Items:, Ø, Brake Setting:, Enabled / Disabled, default is disabled, Battery Type:, Li-xx (Li-ion or Li-poly) / Ni-xx (Ni-MH or NiCd), default is Li-xx., :, Soft Cut-Off (Gradually reduce the output power) or Cut-Off (Immediately stop the output power). Default is Soft Cut-Off., :, Low / Medium / High, default is Medium., For lithium batteries, the number of battery cells is calculated automatically. Low / medium / high cutoff voltage for each cell is: 2.6V/2.85V/3.1V. For example: For a 3 cells lithium pack, when “Medium” cutoff threshold is set, the cut-off voltage will be: 2.85*3=8.55V., For nickel batteries, low / medium / high cutoff voltages are 0%/45%/60% of the startup voltage (i.e. the initial voltage of battery pack), and 0% means the low voltage cut-off function is disabled. For example: For a 10 cells Ni-MH battery, fully charged voltage is 1.44*10=14.4V, when “Medium” cut-off threshold is set, the cut-off voltage will be: 14.4*45%=6.5V., When using balance discharge monitoring and protection function(i.e. Plugging the balance charge connector on battery pack into the BDMP socket on the Guard series ESC, the ESC monitors not only the voltage of the whole battery pack but also the voltage of each cell). For lithium battery, low / medium / high cut off voltage for each cell is: 2.6V/2.85V/3.1V. When the voltage of any cell in battery pack is lower than the cut-off threshold, the protection function activated., Startup Mode:, Normal / Soft /Super-Soft, default is Normal., Timing:, Low / Medium / High, default is Low. (Note2), Note2:, After changing the timing setting, please test your RC model on ground prior to flight!,
Net Speed controllers for brushless motors are designed for best ...SDSHobby
DYNAM BRUSHLESS ESC-70A FOR MODEL AIRPLANES
| Cont. Current | 70A |
| Burst Current (>10s) | 100A |
| BEC Model | switch |
| BEC Output | 5V/3A |
| Cells of Li-Po/Li-ion | 2S-6S |
| Cells of Ni-Cd/Ni-MH | 5S-18S |
| User Programmable | yes |
| Weight | 62g |
| L*W*H (Size) | 70*31*14mm |
| Balance Discharger Protection | N/A |
Specifications:, Features:, Programmable Items:, Ø, Brake Setting:, Enabled / Disabled, default is disabled, Battery Type:, Li-xx (Li-ion or Li-poly) / Ni-xx (Ni-MH or NiCd), default is Li-xx., :, Soft Cut-Off (Gradually reduce the output power) or Cut-Off (Immediately stop the output power). Default is Soft Cut-Off., :, Low / Medium / High, default is Medium., For lithium batteries, the number of battery cells is calculated automatically. Low / medium / high cutoff voltage for each cell is: 2.6V/2.85V/3.1V. For example: For a 3 cells lithium pack, when “Medium” cutoff threshold is set, the cut-off voltage will be: 2.85*3=8.55V., For nickel batteries, low / medium / high cutoff voltages are 0%/45%/60% of the startup voltage (i.e. the initial voltage of battery pack), and 0% means the low voltage cut-off function is disabled. For example: For a 10 cells Ni-MH battery, fully charged voltage is 1.44*10=14.4V, when “Medium” cut-off threshold is set, the cut-off voltage will be: 14.4*45%=6.5V., When using balance discharge monitoring and protection function(i.e. Plugging the balance charge connector on battery pack into the BDMP socket on the Guard series ESC, the ESC monitors not only the voltage of the whole battery pack but also the voltage of each cell). For lithium battery, low / medium / high cut off voltage for each cell is: 2.6V/2.85V/3.1V. When the voltage of any cell in battery pack is lower than the cut-off threshold, the protection function activated., Startup Mode:, Normal / Soft /Super-Soft, default is Normal., Timing:, Low / Medium / High, default is Low. (Note2), Note2:, After changing the timing setting, please test your RC model on ground prior to flight!,
Net Speed controllers for brushless motors are designed for best ...SDSHobby
DYNAM BRUSHLESS ESC-60A FOR MODEL AIRPLANES
| Cont. Current | 60A |
| Burst Current (>10s) | 80A |
| BEC Model | switch |
| BEC Output | 5V/3A |
| Cells of Li-Po/Li-ion | 2S-6S |
| Cells of Ni-Cd/Ni-MH | 5S-18S |
| User Programmable | yes |
| Weight | 60g |
| L*W*H (Size) | 70*31*14mm |
| Balance Discharger Protection | N/A |
Specifications:, Features:, Programmable Items:, Ø, Brake Setting:, Enabled / Disabled, default is disabled, Battery Type:, Li-xx (Li-ion or Li-poly) / Ni-xx (Ni-MH or NiCd), default is Li-xx., :, Soft Cut-Off (Gradually reduce the output power) or Cut-Off (Immediately stop the output power). Default is Soft Cut-Off., :, Low / Medium / High, default is Medium., For lithium batteries, the number of battery cells is calculated automatically. Low / medium / high cutoff voltage for each cell is: 2.6V/2.85V/3.1V. For example: For a 3 cells lithium pack, when “Medium” cutoff threshold is set, the cut-off voltage will be: 2.85*3=8.55V., For nickel batteries, low / medium / high cutoff voltages are 0%/45%/60% of the startup voltage (i.e. the initial voltage of battery pack), and 0% means the low voltage cut-off function is disabled. For example: For a 10 cells Ni-MH battery, fully charged voltage is 1.44*10=14.4V, when “Medium” cut-off threshold is set, the cut-off voltage will be: 14.4*45%=6.5V., When using balance discharge monitoring and protection function(i.e. Plugging the balance charge connector on battery pack into the BDMP socket on the Guard series ESC, the ESC monitors not only the voltage of the whole battery pack but also the voltage of each cell). For lithium battery, low / medium / high cut off voltage for each cell is: 2.6V/2.85V/3.1V. When the voltage of any cell in battery pack is lower than the cut-off threshold, the protection function activated., Startup Mode:, Normal / Soft /Super-Soft, default is Normal., Timing:, Low / Medium / High, default is Low. (Note2), Note2:, After changing the timing setting, please test your RC model on ground prior to flight!,
Net Speed controllers for brushless motors are designed for best ...SDSHobby
DYNAM BRUSHLESS ESC-40A FOR MODEL AIRPLANES
| Cont. Current | 40A |
| Burst Current (>10s) | 55A |
| BEC Model | switch |
| BEC Output | 5V/3A |
| Cells of Li-Po/Li-ion | 2S-6S |
| Cells of Ni-Cd/Ni-MH | 5S-18S |
| User Programmable | yes |
| Weight | 35g |
| L*W*H (Size) | 55*28*12mm |
| Balance Discharger Protection | N/A |
Specifications:, Features:, Programmable Items:, Ø, Brake Setting:, Enabled / Disabled, default is disabled, Battery Type:, Li-xx (Li-ion or Li-poly) / Ni-xx (Ni-MH or NiCd), default is Li-xx., :, Soft Cut-Off (Gradually reduce the output power) or Cut-Off (Immediately stop the output power). Default is Soft Cut-Off., :, Low / Medium / High, default is Medium., For lithium batteries, the number of battery cells is calculated automatically. Low / medium / high cutoff voltage for each cell is: 2.6V/2.85V/3.1V. For example: For a 3 cells lithium pack, when “Medium” cutoff threshold is set, the cut-off voltage will be: 2.85*3=8.55V., For nickel batteries, low / medium / high cutoff voltages are 0%/45%/60% of the startup voltage (i.e. the initial voltage of battery pack), and 0% means the low voltage cut-off function is disabled. For example: For a 10 cells Ni-MH battery, fully charged voltage is 1.44*10=14.4V, when “Medium” cut-off threshold is set, the cut-off voltage will be: 14.4*45%=6.5V., When using balance discharge monitoring and protection function(i.e. Plugging the balance charge connector on battery pack into the BDMP socket on the Guard series ESC, the ESC monitors not only the voltage of the whole battery pack but also the voltage of each cell). For lithium battery, low / medium / high cut off voltage for each cell is: 2.6V/2.85V/3.1V. When the voltage of any cell in battery pack is lower than the cut-off threshold, the protection function activated., Startup Mode:, Normal / Soft /Super-Soft, default is Normal., Timing:, Low / Medium / High, default is Low. (Note2), Note2:, After changing the timing setting, please test your RC model on ground prior to flight!,
Net Speed controllers for brushless motors are designed for best ...SDSHobby
DYNAM BRUSHLESS ESC-30A FOR MODEL AIRPLANES
| Cont. Current | 30A |
| Burst Current (>10s) | 40A |
| BEC Model | switch |
| BEC Output | 5V/3A |
| Cells of Li-Po/Li-ion | 2S-4S |
| Cells of Ni-Cd/Ni-MH | 5S-12S |
| User Programmable | yes |
| Weight | 25g |
| L*W*H (Size) | 45*24*11mm |
| Balance Discharger Protection | N/A |
Specifications:, , Features:, Programmable Items:, Ø, Brake Setting:, Enabled / Disabled, default is disabled, Battery Type:, Li-xx (Li-ion or Li-poly) / Ni-xx (Ni-MH or NiCd), default is Li-xx., :, Soft Cut-Off (Gradually reduce the output power) or Cut-Off (Immediately stop the output power). Default is Soft Cut-Off., :, Low / Medium / High, default is Medium., For lithium batteries, the number of battery cells is calculated automatically. Low / medium / high cutoff voltage for each cell is: 2.6V/2.85V/3.1V. For example: For a 3 cells lithium pack, when “Medium” cutoff threshold is set, the cut-off voltage will be: 2.85*3=8.55V., For nickel batteries, low / medium / high cutoff voltages are 0%/45%/60% of the startup voltage (i.e. the initial voltage of battery pack), and 0% means the low voltage cut-off function is disabled. For example: For a 10 cells Ni-MH battery, fully charged voltage is 1.44*10=14.4V, when “Medium” cut-off threshold is set, the cut-off voltage will be: 14.4*45%=6.5V., When using balance discharge monitoring and protection function(i.e. Plugging the balance charge connector on battery pack into the BDMP socket on the Guard series ESC, the ESC monitors not only the voltage of the whole battery pack but also the voltage of each cell). For lithium battery, low / medium / high cut off voltage for each cell is: 2.6V/2.85V/3.1V. When the voltage of any cell in battery pack is lower than the cut-off threshold, the protection function activated., Startup Mode:, Normal / Soft /Super-Soft, default is Normal., Timing:, Low / Medium / High, default is Low. (Note2), Note2:, After changing the timing setting, please test your RC model on ground prior to flight!,
Net Speed controllers for brushless motors are designed for best ...SDSHobby
DYNAM BRUSHLESS ESC-25A FOR MODEL AIRPLANES
| Cont. Current | 25A |
| Burst Current (>10s) | 35A |
| BEC Model | switch |
| BEC Output | 5V/3A |
| Cells of Li-Po/Li-ion | 2S-4S |
| Cells of Ni-Cd/Ni-MH | 5S-12S |
| User Programmable | yes |
| Weight | 22g |
| L*W*H (Size) | 45*24*11mm |
| Balance Discharger Protection | N/A |
Specifications:, Features:, Programmable Items:, Ø, Brake Setting:, Enabled / Disabled, default is disabled, Battery Type:, Li-xx (Li-ion or Li-poly) / Ni-xx (Ni-MH or NiCd), default is Li-xx., :, Soft Cut-Off (Gradually reduce the output power) or Cut-Off (Immediately stop the output power). Default is Soft Cut-Off., :, Low / Medium / High, default is Medium., For lithium batteries, the number of battery cells is calculated automatically. Low / medium / high cutoff voltage for each cell is: 2.6V/2.85V/3.1V. For example: For a 3 cells lithium pack, when “Medium” cutoff threshold is set, the cut-off voltage will be: 2.85*3=8.55V., For nickel batteries, low / medium / high cutoff voltages are 0%/45%/60% of the startup voltage (i.e. the initial voltage of battery pack), and 0% means the low voltage cut-off function is disabled. For example: For a 10 cells Ni-MH battery, fully charged voltage is 1.44*10=14.4V, when “Medium” cut-off threshold is set, the cut-off voltage will be: 14.4*45%=6.5V., When using balance discharge monitoring and protection function(i.e. Plugging the balance charge connector on battery pack into the BDMP socket on the Guard series ESC, the ESC monitors not only the voltage of the whole battery pack but also the voltage of each cell). For lithium battery, low / medium / high cut off voltage for each cell is: 2.6V/2.85V/3.1V. When the voltage of any cell in battery pack is lower than the cut-off threshold, the protection function activated., Startup Mode:, Normal / Soft /Super-Soft, default is Normal., Timing:, Low / Medium / High, default is Low. (Note2), Note2:, After changing the timing setting, please test your RC model on ground prior to flight!,
Net Speed controllers for brushless motors are designed for best ...SDSHobby
DYNAM BRUSHLESS ESC-18A FOR MODEL AIRPLANES
| Cont. Current | 18A |
| Burst Current (>10s) | 22A |
| BEC Model | switch |
| BEC Output | 5V/3A |
| Cells of Li-Po/Li-ion | 2S-4S |
| Cells of Ni-Cd/Ni-MH | 5S-12S |
| User Programmable | yes |
| Weight | 19g |
| L*W*H (Size) | 45*24*11mm |
| Balance Discharger Protection | N/A |
| means the low voltage cut-off function is disabled. For example | For |
| when “Medium” cut-off threshold is set, the cut-off voltage will be | 14.4*45%=6.5V. |
Specifications:, Features:, Programmable Items:, Ø, Brake Setting:, Enabled / Disabled, default is disabled, Battery Type:, Li-xx (Li-ion or Li-poly) / Ni-xx (Ni-MH or NiCd), default is Li-xx., :, Soft Cut-Off (Gradually, :Low / Medium /, For lithium batteries, the number of battery cells is calculated automatically. Low / medium / high cutoff voltage for each cell is: 2.6V/2.85V/3.1V. For example: For a 3 cells lithium pack, when “Medium” cutoff threshold is set, the cut-off voltage will be: 2.85*3=8.55V., battery, low / medium / high cut off voltage for each cell is:, .6V/2.85V/3.1V. When the voltage of any cell in battery pack is lower, Startup Mode:, Normal / Soft /Super-Soft, default is Normal., Timing:, Low / Medium / High, default is Low. (Note2), Note2:, After changing the timing setting, please test your RC model,
Net Speed controllers for brushless motors are designed for best ...SDSHobby
FUTABA 60CELL CHARGER SWITCH KITS FOR RECEIVER L25CM
| Application | RC airplanes, especially for gas engine |
Specifications:,
D0.8mm 60cell lead wire High tensile resistant, small resistance Gold ...